Commission Decision (EU) 2015/1402 of 15 July 2015 determining the European Union... (32015D1402)
INHALT
Commission Decision (EU) 2015/1402 of 15 July 2015 determining the European Union position with regard to a decision of the management entities under the Agreement between the Government of the United States of America and the European Union on the coordination of energy-efficiency labelling programmes for office equipment on the revision of specifications for computers included in Annex C to the Agreement (Text with EEA relevance)
- COMMISSION DECISION (EU) 2015/1402
- of 15 July 2015
- determining the European Union position with regard to a decision of the management entities under the Agreement between the Government of the United States of America and the European Union on the coordination of energy-efficiency labelling programmes for office equipment on the revision of specifications for computers included in Annex C to the Agreement
- (Text with EEA relevance)
- Sole Article
- ANNEX
- DRAFT DECISION
- of …
- the Management entities under the Agreement between the Government of the United States of America and the European Union on the coordination of energy-efficiency labelling programmes for office equipment on the revision of specifications for computers included in Annex C of the Agreement
- ANNEX
- ANNEX C
- PART II TO THE AGREEMENT
- V. COMPUTER SPECIFICATIONS (VERSION 6.1)
- 1.
- Definitions
- 2.
- Scope
- 2.1.
- Included Products
- 2.2.
- Excluded Products
- 3.
- Qualification Criteria
- 3.1.
- Significant Digits and Rounding
- 3.2.
- General Requirements
- 3.3.
- Power Management Requirements
- 3.4.
- User Information Requirements
- 3.5.
- Requirements for Desktop, Integrated Desktop, and Notebook Computers
- Equation 1:
- TEC Calculation (E
- TEC
- ) for Desktop, Integrated Desktop, Thin Client and Notebook Computers
- Equation 2:
- E
- TEC_MAX
- Calculation for Desktop, Integrated Desktop, and Notebook Computers
- Equation 3:
- Calculation of Allowance for Enhanced-performance Integrated Displays
- 3.6.
- Requirements for Slates/Tablets and Portable All-In-One Computers
- 3.7.
- Requirements for Workstations
- Equation 4:
- P
- TEC
- Calculation for Workstations
- Equation 5:
- P
- TEC_MAX
- Calculation for Workstations
- 3.8.
- Requirements for Small-scale Servers
- Equation 6:
- Calculation of P
- OFF_MAX
- for Small-scale Servers
- Equation 7:
- Calculation of P
- IDLE_MAX
- for Small-scale Servers
- 3.9.
- Requirements for Thin Clients
- Equation 8:
- Calculation of E
- TEC_MAX
- for Thin Clients
- 4.
- Testing
- 4.1.
- Test Methods
- 4.2.
- Number of Units Required for Testing
- 4.3.
- International Market Qualification
- 4.4.
- Customer Software and Management Service Pre-Provisioning
- 5.
- User Interface
- 6.
- Effective Date
- Appendix A
- SAMPLE CALCULATIONS
- TEST METHODS (REVISION AUGUST 2014)
- 1.
- Overview
- 2.
- Applicability
- 3.
- Definitions
- 4.
- Test Setup
- 4.1.
- Test Setup and Instrumentation
- 5.
- Test Conduct
- 5.1.
- Guidance for Implementation of EN 62623
- 5.2.
- Preparing Display Luminance of Notebooks, Integrated Desktops, Slates/Tablets and Portable All-In-One Computers
- 6.
- Test Procedures for all Products
- 6.1.
- UUT Preparation
- 6.2.
- Sleep Mode Testing
- 6.3.
- Long Idle Mode Testing
- 6.4.
- Short Idle Mode Testing
- 6.5.
- Off Mode Testing
- 6.6.
- Additional Testing For Reporting
- 7.
- Test Procedures for Workstations
- 7.1.
- Maximum Power Test
- 7.2.
- Benchmark Test
- 8.
- References
- 9.
- Appendix: Benchmark Parameters
- 9.1.
- Typical Linpack Starting Parameters
Feedback