Commission Regulation (EU) 2023/1670 of 16 June 2023 laying down ecodesign requir... (32023R1670)
INHALT
Commission Regulation (EU) 2023/1670 of 16 June 2023 laying down ecodesign requirements for smartphones, mobile phones other than smartphones, cordless phones and slate tablets pursuant to Directive 2009/125/EC of the European Parliament and of the Council and amending Commission Regulation (EU) 2023/826 (Text with EEA relevance)
- COMMISSION REGULATION (EU) 2023/1670
- of 16 June 2023
- laying down ecodesign requirements for smartphones, mobile phones other than smartphones, cordless phones and slate tablets pursuant to Directive 2009/125/EC of the European Parliament and of the Council and amending Commission Regulation (EU) 2023/826
- (Text with EEA relevance)
- Article 1
- Subject matter and scope
- Article 2
- Definitions
- Article 3
- Ecodesign requirements
- Article 4
- Conformity assessment
- Article 5
- Verification procedure for market surveillance purposes
- Article 6
- Circumvention
- Article 7
- Indicative benchmarks
- Article 8
- Review
- Article 9
- Amendment to Regulation (EU) 2023/826
- Article 10
- Entry into force and application
- ANNEX I
- Definitions applicable to the Annexes
- ANNEX II
- Ecodesign requirements
- A.
- MOBILE PHONES OTHER THAN SMARTPHONES
- 1. RESOURCE EFFICIENCY REQUIREMENTS
- 1.1.
- Design for repair and reuse
- (1) Availability of spare parts:
- (2) Access to repair and maintenance information
- (3) Maximum delivery time of spare parts
- (4) Information on the price of spare parts
- (5) Disassembly requirements
- (6) Requirements for preparation for reuse
- 1.2.
- Design for reliability
- 1.3.
- Marking of plastic components
- 1.4.
- Recyclability requirements
- 2. INFORMATION REQUIREMENTS
- B.
- SMARTPHONES
- 1. RESOURCE EFFICIENCY REQUIREMENTS
- 1.1.
- Design for repair and reuse
- (1) Availability of spare parts
- (2) Access to repair and maintenance information
- (3) Maximum delivery time of spare parts
- (4) Information on the price of spare parts
- (5) Disassembly requirements
- (6) Requirements for preparation for reuse
- (7) Replacement of serialised parts
- 1.2.
- Design for reliability
- 1.3.
- Marking of plastic components
- 1.4.
- Recyclability requirements
- 2. INFORMATION REQUIREMENTS
- C.
- CORDLESS PHONES
- 1. LOW POWER MODES
- 2. RESOURCE EFFICIENCY REQUIREMENTS
- 2.1.
- Design for repair and reuse
- (1) Availability of spare parts
- (2) Access to repair and maintenance information
- (3) Maximum delivery time of spare parts
- (4) Information on the price of spare parts
- (5) Disassembly requirements
- (6) Requirements for preparation for reuse
- 2.2.
- Marking of plastic components
- 2.3.
- Recyclability requirements
- 3. INFORMATION REQUIREMENTS
- D.
- SLATE TABLETS
- 1. RESOURCE EFFICIENCY REQUIREMENTS
- 1.1.
- Design for repair and reuse
- (1) Availability of spare parts
- (2) Access to repair and maintenance information
- (3) Maximum delivery time of spare parts
- (4) Information on the price of spare parts
- (5) Disassembly requirements
- (6) Requirements for preparation for reuse
- (7) Replacement of serialised parts
- 1.2.
- Design for reliability
- 1.3.
- Marking of plastic components
- 1.4.
- Recyclability requirements
- 2. INFORMATION REQUIREMENTS
- ANNEX III
- Measurements and calculations
- ANNEX IIIa
- Transitional methods
- ANNEX IV
- Verification procedure for market surveillance purposes
- ANNEX V
- Benchmarks
Feedback