Regulation No 26 of the Economic Commission for Europe of the United Nations ... (42010X0814(02))
INHALT
Regulation No 26 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of vehicles with regard to their external projections
- Regulation No 26 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of vehicles with regard to their external projections
- 1. SCOPE AND PURPOSE
- 2. DEFINITIONS
- 3. APPLICATION FOR APPROVAL
- 4. APPROVAL
- 5. GENERAL SPECIFICATIONS
- 6. PARTICULAR SPECIFICATIONS
- 6.1. Ornaments.
- 6.2. Headlights.
- 6.3. Grilles and gaps.
- 6.4. Windscreen wipers.
- 6.5. Bumpers.
- 6.6. Handles, hinges and push-buttons of doors, luggage compartments and bonnets; fuel tank filler caps and covers
- Figure 1
- 6.7. Wheels, wheel nuts, hub caps and wheel discs.
- 6.8. Sheet-metal edges.
- 6.9. Body-panels.
- 6.10. Lateral air or rain deflectors.
- 6.11. Jacking brackets and exhaust pipes.
- 6.12. Air intake and outlet flaps.
- 6.13. Roof.
- 6.14. Windows.
- 6.15. Registration plate brackets.
- 6.16. Luggage racks and ski racks.
- 6.17. Aerials
- 6.18. Assembly instructions.
- 7. MODIFICATION OF A VEHICLE TYPE AND EXTENSION OF APPROVAL
- 8. CONFORMITY OF PRODUCTION
- 9. PENALTIES FOR NON-CONFORMITY OF PRODUCTION
- 10. PRODUCTION DEFINITELY DISCONTINUED
- 11. NAMES AND ADDRESSES OF TECHNICAL SERVICES CONDUCTING APPROVAL TESTS AND OF ADMINISTRATIVE DEPARTMENTS
- 12. TRANSITIONAL PROVISIONS
- ANNEX 1
- COMMUNICATION
- (maximum format: A4 (210 × 297 mm))
- ANNEX 2
- ARRANGEMENTS OF APPROVAL MARKS
- MODEL A
- (See paragraphs 4.1.4 and 4.2.4 of this Regulation)
- MODEL B
- (See paragraph 4.1.5 of this Regulation)
- ANNEX 3
- Methods of determining the dimensions of projections and gaps
- 1. METHOD OF DETERMINING THE HEIGHT OF THE PROJECTION OF FOLDS IN BODY PANELS
- 2. METHOD OF DETERMINING THE DIMENSION OF THE PROJECTION OF A COMPONENT MOUNTED ON THE EXTERNAL SURFACE
- 3. METHOD OF DETERMINING THE PROJECTION OF HEADLAMP VISORS AND RIMS
- 4. METHOD OF DETERMINING THE DIMENSION OF A GAP OR THE SPACE BETWEEN ELEMENTS OF A GRILLE
- ANNEX 4
- COMMUNICATION
- (maximum format: A4 (210 × 297 mm))
Feedback