Regulation No 73 of the Economic Commission for Europe of the United Nations ... (42012X0508(01))
INHALT
Regulation No 73 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of I. Vehicles with regard to their lateral protection devices (LPD) — II. Lateral protection devices (LPD) — III. Vehicles with regard to the installation of LPD of an approved type according to Part II of this Regulation
- Regulation No 73 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform provisions concerning the approval of
- PART I — APPROVAL OF VEHICLES WITH REGARD TO THEIR LATERAL PROTECTION DEVICES (LPD)
- PART II — APPROVAL OF LATERAL PROTECTION DEVICES (LPD)
- PART III — APPROVAL OF A VEHICLE WITH REGARD TO THE INSTALLATION OF AN LPD OF AN APPROVED TYPE ACCORDING TO PART II OF THIS REGULATION
- 1. SCOPE
- 2. DEFINITIONS
- 2.1. Definitions common to Parts I, II and III
- 2.2. Definitions specific to Part I
- 2.3. Definitions specific to Part II
- 2.4. Definitions specific to Part III
- 3. REQUIREMENTS
- 3.1. GENERAL
- 3.2. VEHICLE TEST CONDITIONS
- 4. APPLICATION FOR APPROVAL
- 4.1. Application for approval pursuant to Part I of this Regulation
- 4.2. Application for approval pursuant to Part II of this Regulation
- 4.3. Application for approval pursuant to Part III of this Regulation
- 5. APPROVAL
- 5.1. Approval pursuant to Part I of this Regulation
- 5.2. Approval pursuant to Part II of this Regulation
- 5.3. Approval pursuant to Part III of this Regulation
- 6. MODIFICATION AND EXTENSION OF APPROVAL OF A TYPE OF VEHICLE OR LPD
- 7. CONFORMITY OF PRODUCTION
- 8. PENALTIES FOR NON-CONFORMITY OF PRODUCTION
- 9. PRODUCTION DEFINITELY DISCONTINUED
- 10. NAMES AND ADDRESSES OF TECHNICAL SERVICES RESPONSIBLE FOR CONDUCTING APPROVAL TESTS, AND OF ADMINISTRATIVE DEPARTMENTS
- 11. TRANSITIONAL PROVISIONS
- PART I — APPROVAL OF VEHICLES WITH REGARD TO THEIR LATERAL PROTECTION DEVICES (LPD)
- 12. REQUIREMENTS
- 13. DEROGATIONS
- PART II — APPROVAL OF LATERAL PROTECTION DEVICES (LPD)
- 14. REQUIREMENTS
- PART III — APPROVAL OF A VEHICLE WITH REGARD TO THE INSTALLATION OF LATERAL PROTECTION DEVICES (LPD) OF A TYPE APPROVED ACCORDING TO PART II OF THIS REGULATION
- 15. REQUIREMENTS
- 16. DEROGATIONS
- ANNEX 1
- Appendix 1
- COMMUNICATION
- (Maximum format: A4 (210 × 297 mm))
- Appendix 2
- COMMUNICATION
- (Maximum format: A4 (210 × 297 mm))
- Appendix 3
- COMMUNICATION
- (Maximum format: A4 (210 × 297 mm))
- ANNEX 2
- EXAMPLES OF APPROVAL MARKS
- MODEL A
- (see paragraphs 5.1.4 and 5.3.4 of this Regulation)
- MODEL B
- (see paragraph 5.2.4 of this Regulation)
- MODEL C
- (see paragraphs 5.1.5 and 5.3.5 of this Regulation)
- ANNEX 3
- TEST CONDITIONS
- 1. TEST CONDITIONS FOR LPD
- 2. TEST CONDITIONS FOR VEHICLES
Feedback