Commission Regulation (EU) No 748/2012 of 3 August 2012 laying down implementing ... (32012R0748)
INHALT
Commission Regulation (EU) No 748/2012 of 3 August 2012 laying down implementing rules for the airworthiness and environmental certification of aircraft and related products, parts and appliances, as well as for the certification of design and production organisations (recast) Text with EEA relevance
- COMMISSION REGULATION
- (EU) No 748/2012
- of 3 August 2012
- laying down implementing rules for the airworthiness and environmental certification of aircraft and related products, parts and appliances, as well as for the certification of design and production organisations
- (recast)
- (Text with EEA relevance)
- Article 1
- Scope and definitions
- Article 2
- Products, parts and appliances certification
- Article 3
- Continued validity of type-certificates and related certificates of airworthiness
- Article 4
- Continued validity of supplemental type-certificates
- Article 5
- Continued operation of certain aircraft registered by Member States
- Article 6
- Continued validity of parts and appliances certificates
- Article 7
- Permit to fly
- Article 8
- Design organisations
- Article 9
- Production organisations
- Article 10
- Agency measures
- Article 11
- Repeal
- Article 12
- Entry into force
- ANNEX I
- PART 21
- Certification of aircraft and related products, parts and appliances, and of design and production organisations
- 21.1
- General
- SECTION A
- TECHNICAL REQUIREMENTS
- SUBPART A — GENERAL PROVISIONS
- 21.A.1
- Scope
- 21.A.2
- Undertaking by another person than the applicant for, or holder of, a certificate
- 21.A.3A
- Failures, malfunctions and defects
- 21.A.3B
- Airworthiness directives
- 21.A.4
- Coordination between design and production
- SUBPART B — TYPE-CERTIFICATES AND RESTRICTED TYPE-CERTIFICATES
- 21.A.11
- Scope
- 21.A.13
- Eligibility
- 21.A.14
- Demonstration of capability
- 21.A.15
- Application
- 21.A.16A
- Airworthiness codes
- 21.A.16B
- Special conditions
- 21.A.17
- Type-certification basis
- 21.A.18
- Designation of applicable environmental protection requirements and certification specifications
- 21.A.19
- Changes requiring a new type-certificate
- 21.A.20
- Compliance with the type-certification basis and environmental protection requirements
- 21.A.21
- Issue of a type-certificate
- 21.A.23
- Issue of a restricted type-certificate
- 21.A.31
- Type design
- 21.A.33
- Inspection and tests
- 21.A.35
- Flight Tests
- 21.A.41
- Type-certificate
- 21.A.44
- Obligations of the holder
- 21.A.47
- Transferability
- 21.A.51
- Duration and continued validity
- 21.A.55
- Record-keeping
- 21.A.57
- Manuals
- 21.A.61
- Instructions for continued airworthiness
- (SUBPART C — NOT APPLICABLE)
- SUBPART D — CHANGES TO TYPE-CERTIFICATES AND RESTRICTED TYPE-CERTIFICATES
- 21.A.90A
- Scope
- 21.A.90B
- Standard changes
- 21.A.91
- Classification of changes in type design
- 21.A.92
- Eligibility
- 21.A.93
- Application
- 21.A.95
- Minor changes
- 21.A.97
- Major changes
- 21.A.101
- Designation of applicable certification specifications and environmental protection requirements
- 21.A.103
- Issue of approval
- 21.A.105
- Record-keeping
- 21.A.107
- Instructions for continued airworthiness
- 21.A.109
- Obligations and EPA marking
- SUBPART E — SUPPLEMENTAL TYPE-CERTIFICATES
- 21.A.111
- Scope
- 21.A.112A
- Eligibility
- 21.A.112B
- Demonstration of capability
- 21.A.113
- Application for a supplemental type-certificate
- 21.A.114
- Showing of compliance
- 21.A.115
- Issue of a supplemental type-certificate
- 21.A.116
- Transferability
- 21.A.117
- Changes to that part of a product covered by a supplemental type-certificate
- 21.A.118A
- Obligations and EPA marking
- 21.A.118B
- Duration and continued validity
- 21.A.119
- Manuals
- 21.A.120
- Instructions for continued airworthiness
- SUBPART F — PRODUCTION WITHOUT PRODUCTION ORGANISATION APPROVAL
- 21.A.121
- Scope
- 21.A.122
- Eligibility
- 21.A.124
- Application
- 21.A.125A
- Issue of a letter of agreement
- 21.A.125B
- Findings
- 21.A.125C
- Duration and continued validity
- 21.A.126
- Production inspection system
- 21.A.127
- Tests: aircraft
- 21.A.128
- Tests: engines and propellers
- 21.A.129
- Obligations of the manufacturer
- 21.A.130
- Statement of conformity
- SUBPART G — PRODUCTION ORGANISATION APPROVAL
- 21.A.131
- Scope
- 21.A.133
- Eligibility
- 21.A.134
- Application
- 21.A.135
- Issue of production organisation approval
- 21.A.139
- Quality System
- 21.A.143
- Exposition
- 21.A.145
- Approval requirements
- 21.A.147
- Changes to the approved production organisation
- 21.A.148
- Changes of location
- 21.A.149
- Transferability
- 21.A.151
- Terms of approval
- 21.A.153
- Changes to the terms of approval
- 21.A.157
- Investigations
- 21.A.158
- Findings
- 21.A.159
- Duration and continued validity
- 21.A.163
- Privileges
- 21.A.165
- Obligations of the holder
- SUBPART H — CERTIFICATES OF AIRWORTHINESS AND RESTRICTED CERTIFICATES OF AIRWORTHINESS
- 21.A.171
- Scope
- 21.A.172
- Eligibility
- 21.A.173
- Classification
- 21.A.174
- Application
- 21.A.175
- Language
- 21.A.177
- Amendment or modification
- 21.A.179
- Transferability and re-issuance within Member States
- 21.A.180
- Inspections
- 21.A.181
- Duration and continued validity
- 21.A.182
- Aircraft identification
- SUBPART I — NOISE CERTIFICATES
- 21.A.201
- Scope
- 21.A.203
- Eligibility
- 21.A.204
- Application
- 21.A.207
- Amendment or modification
- 21.A.209
- Transferability and re-issuance within Member States
- 21.A.210
- Inspections
- 21.A.211
- Duration and continued validity
- SUBPART J — DESIGN ORGANISATION APPROVAL
- 21.A.231
- Scope
- 21.A.233
- Eligibility
- 21.A.234
- Application
- 21.A.235
- Issue of design organisation approval
- 21.A.239
- Design assurance system
- 21.A.243
- Data
- 21.A.245
- Approval requirements
- 21.A.247
- Changes in design assurance system
- 21.A.249
- Transferability
- 21.A.251
- Terms of approval
- 21.A.253
- Changes to the terms of approval
- 21.A.257
- Investigations
- 21.A.258
- Findings
- 21.A.259
- Duration and continued validity
- 21.A.263
- Privileges
- 21.A.265
- Obligations of the holder
- SUBPART K — PARTS AND APPLIANCES
- 21.A.301
- Scope
- 21.A.303
- Compliance with applicable requirements
- 21.A.305
- Approval of parts and appliances
- 21.A.307
- Release of parts and appliances for installation
- (SUBPART L — NOT APPLICABLE)
- SUBPART M — REPAIRS
- 21.A.431 A
- Scope
- 21.A.431B
- Standard repairs
- 21.A.432A
- Eligibility
- 21.A.432B
- Demonstration of capability
- 21.A.433
- Repair design
- 21.A.435
- Classification of repairs
- 21.A.437
- Issue of a repair design approval
- 21.A.439
- Production of repair parts
- 21.A.441
- Repair embodiment
- 21.A.443
- Limitations
- 21.A.445
- Unrepaired damage
- 21.A.447
- Record-keeping
- 21.A.449
- Instructions for continued airworthiness
- 21.A.451
- Obligations and EPA marking
- (SUBPART N — NOT APPLICABLE)
- SUBPART O — EUROPEAN TECHNICAL STANDARD ORDER AUTHORISATIONS
- 21.A.601
- Scope
- 21.A.602A
- Eligibility
- 21.A.602B
- Demonstration of capability
- 21.A.603
- Application
- 21.A.604
- ETSO Authorisation for an Auxiliary Power Unit (APU)
- 21.A.605
- Data requirements
- 21.A.606
- Issue of ETSO authorisation
- 21.A.607
- ETSO authorisation privileges
- 21.A.608
- Declaration of Design and Performance (DDP)
- 21.A.609
- Obligations of holders of ETSO authorisations
- 21.A.610
- Approval for deviation
- 21.A.611
- Design changes
- 21.A.613
- Record-keeping
- 21.A.615
- Inspection by the Agency
- 21.A.619
- Duration and continued validity
- 21.A.621
- Transferability
- SUBPART P — PERMIT TO FLY
- 21.A.701
- Scope
- 21.A.703
- Eligibility
- 21.A.705
- Competent authority
- 21.A.707
- Application for permit to fly
- 21.A.708
- Flight conditions
- 21.A.709
- Application for approval of flight conditions
- 21.A.710
- Approval of flight conditions
- 21.A.711
- Issue of a permit to fly
- 21.A.713
- Changes
- 21.A.715
- Language
- 21.A.719
- Transferability
- 21.A.721
- Inspections
- 21.A.723
- Duration and continued validity
- 21.A.725
- Renewal of permit to fly
- 21.A.727
- Obligations of the holder of a permit to fly
- 21.A.729
- Record-keeping
- SUBPART Q — IDENTIFICATION OF PRODUCTS, PARTS AND APPLIANCES
- 21.A.801
- Identification of products
- 21.A.803
- Handling of identification data
- 21.A.804
- Identification of parts and appliances
- 21.A.805
- Identification of critical parts
- 21.A.807
- Identification of ETSO articles
- SECTION B
- PROCEDURES FOR COMPETENT AUTHORITIES
- SUBPART A — GENERAL PROVISIONS
- 21.B.5
- Scope
- 21.B.20
- Obligations of the competent authority
- 21.B.25
- Requirements for the organisation of the competent authority
- 21.B.30
- Documented procedures
- 21.B.35
- Changes in organisation and procedures
- 21.B.40
- Resolution of disputes
- 21.B.45
- Reporting/coordination
- 21.B.55
- Record-keeping
- 21.B.60
- Airworthiness directives
- SUBPART B — TYPE-CERTIFICATES AND RESTRICTED TYPE-CERTIFICATES
- (SUBPART C — NOT APPLICABLE)
- SUBPART D — CHANGES TO TYPE-CERTIFICATES AND RESTRICTED TYPE-CERTIFICATES
- SUBPART E — SUPPLEMENTAL TYPE-CERTIFICATES
- SUBPART F — PRODUCTION WITHOUT PRODUCTION ORGANISATION APPROVAL
- 21.B.120
- Investigation
- 21.B.125
- Findings
- 21.B.130
- Issue of letter of agreement
- 21.B.135
- Maintenance of the letter of agreement
- 21.B.140
- Amendment of a letter of agreement
- 21.B.145
- Limitation, suspension and revocation of a letter of agreement
- 21.B.150
- Record-keeping
- SUBPART G — PRODUCTION ORGANISATION APPROVAL
- 21.B.220
- Investigation
- 21.B.225
- Findings
- 21.B.230
- Issue of certificate
- 21.B.235
- Continued surveillance
- 21.B.240
- Amendment of a production organisation approval
- 21.B.245
- Suspension and revocation of a production organisation approval
- 21.B.260
- Record-keeping
- SUBPART H — CERTIFICATES OF AIRWORTHINESS AND RESTRICTED CERTIFICATES OF AIRWORTHINESS
- 21.B.320
- Investigation
- 21.B.325
- Issue of airworthiness certificate
- 21.B.326
- Certificate of airworthiness
- 21.B.327
- Restricted certificate of airworthiness
- 21.B.330
- Suspension and revocation of certificates of airworthiness and restricted certificates of airworthiness
- 21.B.345
- Record-keeping
- SUBPART I — NOISE CERTIFICATES
- 21.B.420
- Investigation
- 21.B.425
- Issue of noise certificates
- 21.B.430
- Suspension and revocation of a noise certificate
- 21.B.445
- Record-keeping
- SUBPART J — DESIGN ORGANISATION APPROVAL
- SUBPART K — PARTS AND APPLIANCES
- (SUBPART L — NOT APPLICABLE)
- SUBPART M — REPAIRS
- (SUBPART N — NOT APPLICABLE)
- SUBPART O — EUROPEAN TECHNICAL STANDARD ORDER AUTHORISATIONS
- SUBPART P — PERMIT TO FLY
- 21.B.520
- Investigation
- 21.B.525
- Issue of permits to fly
- 21.B.530
- Revocation of permits to fly
- 21.B.545
- Record-keeping
- SUBPART Q — IDENTIFICATION OF PRODUCTS, PARTS AND APPLIANCES
- Appendices
- EASA FORMS
- Appendix I
- Authorised Release Certificate — EASA Form 1 referred to in Annex I (Part 21)
- Instructions for the use of EASA Form 1
- 1. PURPOSE AND USE
- 2. GENERAL FORMAT
- 3. COPIES
- 4. ERROR(S) ON A CERTIFICATE
- 5. COMPLETION OF THE CERTIFICATE BY THE ORIGINATOR
- Block 1
- Approving competent authority/Country
- Block 2
- EASA Form 1 header
- Block 3
- Form Tracking Number
- Block 4
- Organisation Name and Address
- Block 5
- Work Order/Contract/Invoice
- Block 6
- Item
- Block 7
- Description
- Block 8
- Part Number
- Block 9
- Quantity
- Block 10
- Serial Number
- Block 11
- Status/Work
- Block 12
- Remarks
- Block 13a
- Mark only one of the two boxes:
- Block 13b
- Authorised Signature
- Block 13c
- Approval/Authorisation Number
- Block 13d
- Name
- Block 13e
- Date
- Block 14a-14e
- General Requirements for blocks 14a-14e:
- User/Installer Responsibilities
- Appendix II
- Airworthiness Review Certificate — EASA Form 15a
- Appendix III
- Appendix IV
- Appendix V
- Restricted Certificate of Airworthiness — EASA Form 24
- Appendix VI
- Certificate of Airworthiness — EASA Form 25
- Appendix VII
- Appendix VIII
- Aircraft statement of conformity — EASA Form 52
- Instructions for the use of the Aircraft Statement of Conformity EASA Form 52
- 1. PURPOSE AND SCOPE
- 2. GENERAL
- 3. COMPLETION OF THE STATEMENT OF CONFORMITY BY THE ORIGINATOR
- Appendix IX
- CERTIFICATE OF RELEASE TO SERVICE — EASA FORM 53
- COMPLETION INSTRUCTIONS
- Appendix X
- Production Organisation Approval Certificates referred to in Subpart G of Annex I (Part 21) — EASA Form 55
- Appendix XI
- Letter of agreement — EASA Form 65 — referred to in Subpart F of Annex I (Part 21)
- ANNEX II
- ANNEX III
Feedback