Regulation (EU) No 1007/2011 of the European Parliament and of the Council of 27 ... (32011R1007)
INHALT
Regulation (EU) No 1007/2011 of the European Parliament and of the Council of 27 September 2011 on textile fibre names and related labelling and marking of the fibre composition of textile products and repealing Council Directive 73/44/EEC and Directives 96/73/EC and 2008/121/EC of the European Parliament and of the Council Text with EEA relevance
- REGULATION (EU) No 1007/2011 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
- of 27 September 2011
- on textile fibre names and related labelling and marking of the fibre composition of textile products and repealing Council Directive 73/44/EEC and Directives 96/73/EC and 2008/121/EC of the European Parliament and of the Council
- (Text with EEA relevance)
- CHAPTER 1
- GENERAL PROVISIONS
- Article 1
- Subject matter
- Article 2
- Scope
- Article 3
- Definitions
- Article 4
- General requirement on the making available on the market of textile products
- CHAPTER 2
- TEXTILE FIBRE NAMES AND RELATED LABELLING AND MARKING REQUIREMENTS
- Article 5
- Textile fibre names
- Article 6
- Applications for new textile fibre names
- Article 7
- Pure textile products
- Article 8
- Fleece wool or virgin wool products
- Article 9
- Multi-fibre textile products
- Article 10
- Decorative fibres and fibres with antistatic effect
- Article 11
- Multi-component textile products
- Article 12
- Textile products containing non-textile parts of animal origin
- Article 13
- Labelling and marking of textile products listed in Annex IV
- Article 14
- Labels and markings
- Article 15
- Obligation to supply the label or marking
- Article 16
- The use of textile fibre names and fibre composition descriptions
- Article 17
- Derogations
- CHAPTER 3
- MARKET SURVEILLANCE
- Article 18
- Market surveillance checks
- Article 19
- Determination of fibre composition
- Article 20
- Tolerances
- CHAPTER 4
- FINAL PROVISIONS
- Article 21
- Delegated acts
- Article 22
- Exercise of the delegation
- Article 23
- Reporting
- Article 24
- Review
- Article 25
- Study on hazardous substances
- Article 26
- Transitional provision
- Article 27
- Repeal
- Article 28
- Entry into force
- ANNEX I
- ANNEX II
- Minimum requirements regarding a technical file to be included in the application for a new textile fibre name
- (referred to in Article 6)
- ANNEX III
- Names referred to in Article 8(1)
- ANNEX IV
- ANNEX V
- Textile products for which labelling or marking is not mandatory
- (referred to in Article 17(2))
- ANNEX VI
- Textile products for which inclusive labelling is sufficient
- (referred to in Article 17(3))
- ANNEX VII
- ANNEX VIII
- Methods for the quantitative analysis of binary and ternary textile fibre mixtures
- (referred to in Article 19(1))
- CHAPTER 1
- I.
- Preparation of laboratory test samples and test specimens to determine the fibre composition of textile products
- 1. FIELD OF APPLICATION
- 2. DEFINITIONS
- 2.1. Bulk source
- 2.2. Laboratory bulk sample
- 2.3. Laboratory test sample
- 2.4. Test specimen
- 3. PRINCIPLE
- 4. SAMPLING FROM LOOSE FIBRES
- 4.1. Unorientated fibres
- 4.2. Orientated fibres (cards, webs, slivers, rovings)
- 5. SAMPLING YARN
- 5.1. Yarn in packages or in banks
- 5.2. Yarn on warp
- 6. SAMPLING FABRIC
- 6.1. From a laboratory bulk sample consisting of a single cutting representative of the cloth
- 6.2. From a laboratory bulk sample consisting of several cuttings
- 7. SAMPLING MADE-UP AND FINISHED PRODUCTS
- II.
- Introduction to the methods for the quantitative analysis of textile fibre mixtures
- CHAPTER 2
- METHODS FOR QUANTITATIVE ANALYSIS OF CERTAIN BINARY TEXTILE FIBRE MIXTURES
- I.
- General information common to the methods given for the quantitative chemical analysis of textile fibre mixtures
- I.1. FIELD OF APPLICATION
- I.2. PRINCIPLE
- I.3. MATERIALS AND EQUIPMENT
- I.3.1. Apparatus
- I.4. CONDITIONING AND TESTING ATMOSPHERE
- I.5. LABORATORY TEST SAMPLE
- I.6. PRE-TREATMENT OF LABORATORY TEST SAMPLE(7)
- I.7. TEST PROCEDURE
- I.7.1. General instructions
- I.7.1.1. Drying
- I.7.1.2. Cooling
- I.7.1.3. Weighing
- I.7.2. Procedure
- I.8. CALCULATION AND EXPRESSION OF RESULTS
- II.
- Method of quantitative analysis by manual separation
- II.1. FIELD OF APPLICATION
- II.2. PRINCIPLE
- II.3. APPARATUS
- II.4. REAGENTS
- II.5. CONDITIONING AND TESTING ATMOSPHERE
- II.6. LABORATORY TEST SAMPLE
- II.7. PRE-TREATMENT OF LABORATORY TEST SAMPLE
- II.8. PROCEDURE
- II.8.1. Analysis of yarn
- II.8.2. Analysis of cloth
- II.9. CALCULATION AND EXPRESSION OF RESULTS
- III.1. PRECISION OF THE METHODS
- III.2. TEST REPORT
- IV.
- Special methods
- METHOD No 1
- ACETATE AND CERTAIN OTHER FIBRES
- (Acetone method)
- 1. FIELD OF APPLICATION
- 2. PRINCIPLE
- 3. APPARATUS AND REAGENTS (additional to those specified in the general instructions)
- 3.1. Apparatus
- 3.2. Reagent
- 4. TEST PROCEDURE
- 5. CALCULATION AND EXPRESSION OF RESULTS
- 6. PRECISION
- METHOD No 2
- CERTAIN PROTEIN FIBRES AND CERTAIN OTHER FIBRES
- (Method using hypochlorite)
- 1. FIELD OF APPLICATION
- 2. PRINCIPLE
- 3. APPARATUS AND REAGENTS (other than those specified in the general instructions)
- 3.1. Apparatus
- 3.2. Reagents
- (a) Hypochlorite reagent
- (i) Lithium hypochlorite solution
- (ii) Sodium hypochlorite solution
- (b) Acetic acid, dilute solution
- 4. TEST PROCEDURE
- 5. CALCULATION AND EXPRESSION OF RESULTS
- 6. PRECISION
- METHOD No 3
- VISCOSE, CUPRO OR CERTAIN TYPES OF MODAL AND CERTAIN OTHER FIBRES
- (Method using formic acid and zinc chloride)
- 1. FIELD OF APPLICATION
- 2. PRINCIPLE
- 3. APPARATUS AND REAGENTS (other than those specified in the general instructions)
- 3.1. Apparatus
- 3.2. Reagents
- 4. TEST PROCEDURE
- 5. CALCULATION AND EXPRESSION OF RESULTS
- 6. PRECISION
- METHOD No 4
- POLYAMIDE OR NYLON, AND CERTAIN OTHER FIBRES
- (Method using 80 % m/m formic acid)
- 1. FIELD OF APPLICATION
- 2. PRINCIPLE
- 3. APPARATUS AND REAGENTS (other than those specified in the general instructions)
- 3.1. Apparatus
- 3.2. Reagents
- 4. TEST PROCEDURE
- 5. CALCULATION AND EXPRESSION OF RESULTS
- 6. PRECISION
- METHOD No 5
- ACETATE AND CERTAIN OTHER FIBRES
- (Method using benzyl alcohol)
- 1. FIELD OF APPLICATION
- 2. PRINCIPLE
- 3. APPARATUS AND REAGENTS (other than those specified in the general instructions)
- 3.1. Apparatus
- 3.2. Reagents
- 4. TEST PROCEDURE
- 5. CALCULATION AND EXPRESSION OF RESULTS
- 6. PRECISION
- METHOD No 6
- TRIACETATES OR POLYLACTIDE AND CERTAIN OTHER FIBRES
- (Method using dichloromethane)
- 1. FIELD OF APPLICATION
- 2. PRINCIPLE
- 3. APPARATUS AND REAGENTS (other than those specified in the general instructions)
- 3.1. Apparatus
- 3.2. Reagent
- 4. TEST PROCEDURE
- 5. CALCULATION AND EXPRESSION OF RESULTS
- 6. PRECISION
- METHOD No 7
- CERTAIN CELLULOSE FIBRES AND CERTAIN OTHER FIBRES
- (Method using 75 % m/m sulphuric acid)
- 1. FIELD OF APPLICATION
- 2. PRINCIPLE
- 3. APPARATUS AND REAGENTS (other than those specified in the general instructions)
- 3.1. Apparatus
- 3.2. Reagents
- 4. TEST PROCEDURE
- 5. CALCULATION AND EXPRESSION OF RESULTS
- 6. PRECISION
- METHOD No 8
- ACRYLICS, CERTAIN MODACRYLICS OR CERTAIN CHLOROFIBRES AND CERTAIN OTHER FIBRES
- (Method using dimethylformamide)
- 1. FIELD OF APPLICATION
- 2. PRINCIPLE
- 3. APPARATUS AND REAGENTS (other than those specified in the general instructions)
- 3.1. Apparatus
- 3.2. Reagent
- 4. TEST PROCEDURE
- 5. CALCULATION AND EXPRESSION OF RESULTS
- 6. PRECISION
- METHOD No 9
- CERTAIN CHLOROFIBRES AND CERTAIN OTHER FIBRES
- (Method using 55,5/44,5 % v/v mixture of carbon disulphide and acetone)
- 1. FIELD OF APPLICATION
- 2. PRINCIPLE
- 3. APPARATUS AND REAGENTS (other than those specified in the general instructions)
- 3.1. Apparatus
- 3.2. Reagents
- 4. TEST PROCEDURE
- 5. CALCULATION AND EXPRESSION OF RESULTS
- 6. PRECISION
- METHOD No 10
- ACETATE AND CERTAIN OTHER FIBRES
- (Method using glacial acetic acid)
- 1. FIELD OF APPLICATION
- 2. PRINCIPLE
- 3. APPARATUS AND REAGENTS (other than those specified in the general instructions)
- 3.1. Apparatus
- 3.2. Reagent
- 4. TEST PROCEDURE
- 5. CALCULATION AND EXPRESSION OF RESULTS
- 6. PRECISION
- METHOD No 11
- SILK AND CERTAIN OTHER FIBRES
- (Method using 75 % m/m sulphuric acid)
- 1. FIELD OF APPLICATION
- 2. PRINCIPLE
- 3. APPARATUS AND REAGENTS (other than those specified in the general instructions)
- 3.1. Apparatus
- 3.2. Reagents
- 4. TEST PROCEDURE
- 5. CALCULATION AND EXPRESSION OF RESULTS
- 6. PRECISION
- METHOD No 12
- JUTE AND CERTAIN ANIMAL FIBRES
- (Method by determining nitrogen content)
- 1. FIELD OF APPLICATION
- 2. PRINCIPLE
- 3. APPARATUS AND REAGENTS (other than those specified in the general instructions)
- 3.1. Apparatus
- 3.2. Reagents
- 4. PRE-TREATMENT OF TEST SAMPLE
- 5. TEST PROCEDURE
- 5.1. General instructions
- 5.2. Detailed procedure
- 6. CALCULATION AND EXPRESSION OF RESULTS
- 7. PRECISION
- METHOD No 13
- POLYPROPYLENE FIBRES AND CERTAIN OTHER FIBRES
- (Xylene method)
- 1. FIELD OF APPLICATION
- 2. PRINCIPLE
- 3. APPARATUS AND REAGENTS (other than those specified in the general instructions)
- 3.1. Apparatus
- 3.2. Reagent
- 4. TEST PROCEDURE
- 5. CALCULATION AND EXPRESSION OF RESULTS
- 6. PRECISION
- METHOD No 14
- CERTAIN FIBRES AND CHLOROFIBRES (HOMOPOLYMERS OF VINYL CHLORIDE), ELASTOLEFIN OR MELAMINE
- (Concentrated sulphuric acid method)
- 1. FIELD OF APPLICATION
- 2. PRINCIPLE
- 3. APPARATUS AND REAGENTS (other than those specified in the general instructions)
- 3.1. Apparatus
- 3.2. Reagents
- 4. TEST PROCEDURE
- 5. CALCULATION AND EXPRESSION OF RESULTS
- 6. PRECISION
- METHOD No 15
- CHLOROFIBRES, CERTAIN MODACRYLICS, CERTAIN ELASTANES, ACETATES, TRIACETATES AND CERTAIN OTHER FIBRES
- (Method using cyclohexanone)
- 1. FIELD OF APPLICATION
- 2. PRINCIPLE
- 3. APPARATUS AND REAGENTS (other than those specified in the general instructions)
- 3.1. Apparatus
- 3.2. Reagents
- 4. TEST PROCEDURE
- 5. CALCULATION AND EXPRESSION OF RESULTS
- 6. PRECISION
- Figure referred to in point 3.1(a) of method No 15
- METHOD No 16
- MELAMINE AND CERTAIN OTHER FIBRES
- (Method using hot formic acid)
- 1. FIELD OF APPLICATION
- 2. PRINCIPLE
- 3. APPARATUS AND REAGENTS (other than those specified in the general instructions)
- 3.1. Apparatus
- 3.2. Reagents
- 4. TEST PROCEDURE
- 5. CALCULATION AND EXPRESSION OF RESULTS
- 6. PRECISION
- CHAPTER 3
- QUANTITATIVE ANALYSIS OF TERNARY TEXTILE FIBRE MIXTURES
- INTRODUCTION
- I.
- General information on methods for the quantitative chemical analysis of ternary fibre mixtures
- I.1. FIELD OF APPLICATION
- I.2. PRINCIPLE
- I.3. MATERIALS AND EQUIPMENT
- I.3.1. Apparatus
- I.3.2. Reagents
- I.4. CONDITIONING AND TESTING ATMOSPHERE
- I.5. LABORATORY TEST SAMPLE
- I.6. PRE-TREATMENT OF LABORATORY TEST SAMPLE(14)
- I.7. TEST PROCEDURE
- I.7.1. General instructions
- I.7.1.1. Drying
- I.7.1.2. Cooling
- I.7.1.3. Weighing
- I.7.2. Procedure
- I.8. CALCULATION AND EXPRESSION OF RESULTS
- I.8.1.1. - VARIANT 1 -
- I.8.1.2. - VARIANT 2 -
- I.8.1.3. - VARIANT 3 -
- I.8.1.4. - VARIANT 4 -
- I.8.3. Note:
- II.
- Method of quantitative analysis by manual separation of ternary fibre mixtures
- II.1. FIELD OF APPLICATION
- II.2. PRINCIPLE
- II.3. APPARATUS
- II.4. REAGENTS
- II.5. CONDITIONING AND TESTING ATMOSPHERE
- II.6. LABORATORY TEST SAMPLE
- II.7. PRE-TREATMENT OF LABORATORY TEST SAMPLES
- II.8. PROCEDURE
- II.8.1. Analysis of yarn
- II.8.2. Analysis of cloth
- II.9. CALCULATION AND EXPRESSION OF RESULTS
- III.
- Method of quantitative analysis of ternary fibre mixtures by a combination of manual separation and chemical separation
- III.1. PRECISION OF THE METHODS
- III.2. TEST REPORT
- IV.
- Examples of the calculation of percentages of the components of certain ternary fibre mixtures using some of the variants described in point I.8.1.
- VARIANT No 1
- VARIANT No 4
- V.
- Table of typical ternary fibre mixtures which may be analysed using Union methods of analysis of binary fibre mixtures (for illustration purposes)
- ANNEX IX
- ANNEX X
Feedback