Regulation No 54 of the Economic Commission for Europe of the United Nations ... (42008X0711(01))
INHALT
Regulation No 54 of the Economic Commission for Europe of the United Nations (UNECE) — Uniform provisions concerning the approval of pneumatic tyres for commercial vehicles and their trailers
- Regulation No 54 of the Economic Commission for Europe of the United Nations (UNECE) — Uniform provisions concerning the approval of pneumatic tyres for commercial vehicles and their trailers
- 1. SCOPE
- 2. DEFINITIONS
- 3. MARKINGS
- 4. APPLICATION FOR APPROVAL
- 5. APPROVAL
- 6. SPECIFICATIONS
- 6.1. Dimensions of tyres
- 6.1.1. Section width of a tyre
- 6.1.2. Outer diameter of a tyre
- 6.1.3. Method of measuring pneumatic tyres
- 6.1.4. Tyre section width specifications
- 6.1.5. Tyre outer diameter specifications
- 6.2. Load/speed endurance test
- 7. MODIFICATION AND EXTENSION OF APPROVAL OF A TYRE TYPE
- 8. CONFORMITY OF PRODUCTION
- 9. PENALTIES FOR NON-CONFORMITY OF PRODUCTION
- 10. PRODUCTION DEFINITELY DISCONTINUED
- 11. NAMES AND ADDRESSES OF TECHNICAL SERVICES RESPONSIBLE FOR CONDUCTING APPROVAL TESTS, AND OF ADMINISTRATIVE DEPARTMENTS
- Explanatory figure
- (See paragraph 2 of the Regulation)
- ANNEX I
- COMMUNICATION
- (Maximum format: A4 (210 × 297 mm))
- ANNEX II
- ARRANGEMENT OF APPROVAL MARK
- ANNEX III
- Arrangement of tyre markings
- ANNEX IV
- ANNEX V
- Tyre-size designation and dimensions
- PART I
- EUROPEAN TYRES
- PART II
- UNITED STATES TYRES
- ANNEX VI
- Method of measuring pneumatic tyres
- ANNEX VII
- Procedure for load/speed endurance tests
- 1. PREPARING THE TYRE
- 2. TEST PROCEDURE
- 3. LOAD/SPEED TEST PROGRAMME FOR TYRE WITH SPEED CATEGORY SYMBOL Q AND ABOVE
- 4. EQUIVALENT TEST METHODS
- Appendix 1
- Appendix 2
- ANNEX VIII
- ANNEX IX
- COMMUNICATION
- Upgrade of Service Description for the purposes of retreading in accordance with Regulation No 109
- (Maximum format: A4 (210 × 297 mm))
Feedback