Regulation No 122 of the Economic Commission for Europe of the United Nations... (42010X0630(08))
INHALT
Regulation No 122 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform technical prescriptions concerning the approval of vehicles of categories M, N and O with regard to their heating systems
- Regulation No 122 of the Economic Commission for Europe of the United Nations (UN/ECE) — Uniform technical prescriptions concerning the approval of vehicles of categories M, N and O with regard to their heating systems
- 1. SCOPE
- 2. DEFINITIONS: GENERAL
- 3. APPLICATION FOR APPROVAL
- 3.1. APPLICATION FOR APPROVAL OF A TYPE OF VEHICLE WITH REGARD TO ITS HEATING SYSTEM
- 3.2. APPLICATION FOR APPROVAL OF A TYPE OF HEATER
- 4. APPROVAL
- 5. PART I — APPROVAL OF A VEHICLE TYPE WITH REGARD TO ITS HEATING SYSTEM
- 5.1. Definition
- 5.2. Specifications
- 5.3. Vehicle Installation Requirements for Combustion Heaters
- 5.3.1. Scope
- 5.3.2. Positioning of combustion heater
- 5.3.3. Fuel supply
- 5.3.4. Exhaust system
- 5.3.5. Combustion air inlet
- 5.3.6. Heating air inlet
- 5.3.7. Heating air outlet
- 5.3.8. Automatic control of the heating system
- 6. PART II — APPROVAL OF A HEATING SYSTEM WITH REGARD TO ITS OPERATIONAL SAFETY
- 6.1. Definitions
- 6.2. Specifications: General
- 6.3. Specifications: Combustion heaters
- 7. MODIFICATION AND EXTENSION OF APPROVAL OF A VEHICLE OR COMPONENT TYPE
- 8. CONFORMITY OF PRODUCTION
- 9. PENALTIES FOR NON-CONFORMITY OF PRODUCTION
- 10. PRODUCTION DEFINITELY DISCONTINUED
- 11. NAMES AND ADDRESSES OF TECHNICAL SERVICES CONDUCTING APPROVAL TESTS, AND ADMINISTRATIVE DEPARTMENTS
- ANNEX 1
- PART 1
- Appendix 1
- MODEL INFORMATION DOCUMENT
- 0. GENERAL
- 1. GENERAL CONSTRUCTION CHARACTERISTICS OF THE VEHICLE
- 2. POWER PLANT
- 3. BODYWORK
- Appendix 2
- MODEL INFORMATION DOCUMENT
- 1. GENERAL
- 2. COMBUSTION HEATER (IF ANY)
- PART 2
- Appendix 1
- (Maximum format: A4 (210 mm × 297 mm))
- COMMUNICATION
- Appendix 2
- (Maximum format: A4 (210 mm × 297 mm))
- COMMUNICATION
- ANNEX 2
- ARRANGEMENTS OF APPROVAL MARKS
- MODEL A
- (See paragraph 4.5 of this Regulation)
- MODEL B
- (See paragraph 4.4 of this Regulation)
- MODEL C
- (See paragraph 4.6 of this Regulation)
- ANNEX 3
- REQUIREMENTS FOR WASTE HEATING SYSTEMS – AIR
- ANNEX 4
- TEST PROCEDURE FOR AIR QUALITY
- ANNEX 5
- TEST PROCEDURE FOR TEMPERATURE
- ANNEX 6
- TEST PROCEDURE FOR EXHAUST EMISSION OF COMBUSTION HEATERS
- ANNEX 7
- ADDITIONAL REQUIREMENTS FOR COMBUSTION HEATERS
- ANNEX 8
- Safety requirments for LPG combustion heaters and LPG heating systems
- 1. LPG HEATING SYSTEMS FOR ROAD USE IN MOTOR VEHICLES
- 2. LPG HEATING SYSTEMS FOR STATIONARY USE ONLY IN MOTOR VEHICLES AND THEIR TRAILERS
- ANNEX 9
- Additional provisions applicable to certain vehicles as specified in the ADR
- 1. Scope
- 2. Definitions
- 3. Technical Provisions
- 3.1. General (EX/II, EX/III, AT, FL, OX and MEMU vehicles)
- 3.2. EX/II, EX/III and MEMU vehicles
- 3.3. FL vehicles
Feedback