46 CFR Part 54
PART 54—PRESSURE VESSELS
- PART 54—PRESSURE VESSELS
- Chapter I—Coast Guard, Department of Homeland Security › Subchapter F—Marine Engineering
- Subpart 54.01—General Requirements
- § 54.01-1 Incorporation by reference.
- § 54.01-2 Adoption of Division 1 of Section VIII of the ASME BPVC.
- § 54.01-5 Scope (modifies U-1 and U-2).
- § 54.01-10 Steam-generating pressure vessels (modifies U-1(g)).
- § 54.01-15 Exemptions from shop inspection and plan approval (modifies U-1(c)(2)).
- § 54.01-17 Pressure vessel for human occupancy (PVHO).
- § 54.01-18 Plan approval.
- § 54.01-25 Miscellaneous pressure components (modifies UG-11).
- § 54.01-30 Loadings (modifies UG-22).
- § 54.01-35 Corrosion (modifies UG-25).
- § 54.01-40 External pressure (modifies UG-28).
- Subpart 54.03—Low Temperature Operation
- § 54.03-1 Scope.
- § 54.03-5 General.
- Subpart 54.05—Toughness Tests
- § 54.05-1 Scope (replaces UG-84).
- § 54.05-3 Tests required.
- § 54.05-5 Toughness test specimens.
- § 54.05-6 Toughness test temperatures.
- § 54.05-10 Certification of material toughness tests.
- § 54.05-15 Weldment toughness tests—procedure qualifications.
- § 54.05-16 Production toughness testing.
- § 54.05-17 Weld toughness test acceptance criteria.
- § 54.05-20 Impact test properties for service of 0 °F and below.
- § 54.05-25 [Reserved]
- § 54.05-30 Allowable stress values at low temperatures.
- Subpart 54.10—Inspection, Reports, and Stamping
- § 54.10-1 Scope (modifies UG-90 through UG-103 and UG-115 through UG-120).
- § 54.10-3 Marine inspectors and Coast Guard Symbol stamping (replaces UG-90 and UG-91, and modifies UG-92 through UG-103).
- § 54.10-5 Maximum allowable working pressure (reproduces UG-98).
- § 54.10-10 Standard hydrostatic test (modifies UG-99).
- § 54.10-15 Pneumatic test (modifies UG-100).
- § 54.10-20 Marking and stamping.
- § 54.10-25 Manufacturers' data report forms (modifies UG-120).
- Subpart 54.15—Pressure-Relief Devices
- § 54.15-1 General (modifies UG-125 through UG-137).
- § 54.15-3 Definitions (modifies appendix 3).
- § 54.15-5 Protective devices (modifies UG-125).
- § 54.15-10 Safety and relief valves (modifies UG-126).
- § 54.15-13 Rupture disks (modifies UG-127).
- § 54.15-15 Relief devices for unfired steam boilers, evaporators, and heat exchangers (modifies UG-126).
- § 54.15-25 Minimum relief capacities for cargo tanks containing compressed or liquefied gas.
- Subpart 54.20—Fabrication by Welding
- § 54.20-1 Scope (modifies UW-1 through UW-65).
- § 54.20-2 Fabrication for hazardous materials (replaces UW-2(a)).
- § 54.20-3 Design (modifies UW-9, UW-11(a), UW-13, and UW-16).
- § 54.20-5 Welding qualification tests and production testing (modifies UW-26, UW-28, UW-29, UW-47, and UW-48).
- Subpart 54.23—Fabrication by Brazing
- § 54.23-1 Scope (modifies UB-1).
- Subpart 54.25—Construction With Carbon, Alloy, and Heat-Treated Steels
- § 54.25-1 Scope.
- § 54.25-3 Steel plates (modifies UCS-6).
- § 54.25-5 Corrosion allowance.
- § 54.25-7 Requirement for postweld heat treatment (modifies UCS-56).
- § 54.25-8 Radiography (modifies UW-11(a), UCS-57, UNF-57, UHA-33, and UHT-57).
- § 54.25-10 Low temperature operation—ferritic steels (replaces UCS-65 through UCS-67).
- § 54.25-15 Low temperature operation—high alloy steels (modifies UHA-23(b) and UHA-51).
- § 54.25-20 Low temperature operation—ferritic steels with properties enhanced by heat treatment (modifies UHT-5(c), UHT-6, UHT-23, and UHT-82).
- § 54.25-25 Welding of quenched and tempered steels (modifies UHT-82).
- Subpart 54.30—Mechanical Stress Relief
- § 54.30-1 Scope.
- § 54.30-3 Introduction.
- § 54.30-5 Limitations and requirements.
- § 54.30-10 Method of performing mechanical stress relief.
- § 54.30-15 Requirement for analysis and computation.
Feedback