Commission Implementing Regulation (EU) 2021/447 of 12 March 2021 determining rev... (32021R0447)
EU - Rechtsakte: 15 Environment, consumers and health protection

COMMISSION IMPLEMENTING REGULATION (EU) 2021/447

of 12 March 2021

determining revised benchmark values for free allocation of emission allowances for the period from 2021 to 2025 pursuant to Article 10a(2) of Directive 2003/87/EC of the European Parliament and of the Council

(Text with EEA relevance)

THE EUROPEAN COMMISSION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Directive 2003/87/EC of the European Parliament and of the Council of 13 October 2003 establishing a system for greenhouse gas emission allowance trading within the Union and amending Council Directive 96/61/EC (1), and in particular the third subparagraph of Article 10a(2) thereof,
Whereas:
(1) Commission Decision 2011/278/EU (2) determined 54 benchmarks serving as basis for free allocation (the ‘benchmarks’) and values for those benchmarks for the period from 2013 to 2020. Commission Delegated Regulation (EU) 2019/331 (3) repealed and replaced Decision 2011/278/EU as from 1 January 2021 and laid down identical starting points for the determination of annual reduction rates for each benchmark value update for the period from 2021 to 2030.
(2) To the extent feasible, the 54 benchmark values in Decision 2011/278/EU were determined on the basis of data on the greenhouse gas efficiency of individual installations provided by the respective European sector associations following rules defined by the Commission through a guidance paper and so-called ‘sector rule books’. Given the voluntary character of the data collection, the dataset did not cover all concerned installations. 14 product benchmark values were based on data from single-product installations, as an assignment of emissions to individual products at the concerned multi-product installations was not regarded feasible in the given time frame. Due to a lack of data from individual installations, five product benchmark values as well as the heat and fuel benchmark values were based on information from Reference Documents on Best Available Techniques (BREFs) or other literature. Four product benchmark values were based on other product benchmark values to ensure a level playing field for producers of the same or similar products.
(3) The revised benchmark values are to be determined on the basis of verified information on the greenhouse gas efficiency of installations reported pursuant to Article 11 of Directive 2003/87/EC for the years 2016 and 2017. For each benchmark, the average performance in 2016 and 2017 of the 10 % most efficient installations is to be calculated. On the basis of a comparison of those values with the benchmark values set out in Decision 2011/278/EU which were based on performance data for the years 2007 and 2008, annual reduction rates are to be determined for each benchmark for the 9-year period from 2007/2008 to 2016/2017. Those annual reduction rates are then to be used to calculate, by means of extrapolation, the corresponding reductions of the benchmark values for the 15-year period from 2007/2008 to 2022/2023. In accordance with Article 10a(2) of Directive 2003/87/EC, the applied reduction over the 15-year period should not be lower than 3 % and not be higher than 24 %. Specific provisions apply for the update of the benchmark values for aromatics, hydrogen, syngas and hot metal.
(4) The list of installations containing information relevant for the free allocation of emission allowances was submitted to the Commission by the Member States by 30 September 2019 in accordance with Article 11(1) of Directive 2003/87/EC. To ensure that the benchmark values are based on correct data, the Commission carried out in-depth completeness and consistency checks of the data relevant for the free allocation of emission allowances, also using automated tools. Where appropriate, the Commission asked the concerned competent authorities for clarifications and corrections. As a result of this procedure, the Commission obtained an accurate, consistent and comparable set of data on the greenhouse gas efficiencies of all stationary installations covered by Directive 2003/87/EC. That high-quality dataset was used to determine the revised benchmark values for the period from 2021 to 2025 for each of the 54 benchmarks. Data from all sub-installations falling under the definition of a specific benchmark, as set out in Annex I to Delegated Regulation (EU) 2019/331, were used to determine the average performance of the 10 % most efficient installations in the years 2016 and 2017, as established in Article 10a(2) of Directive 2003/87/EC and recital (11) of Directive (EU) 2018/410 of the European Parliament and of the Council (4).
(5) Article 27 of Directive 2003/87/EC establishes that Member States are allowed under certain conditions to exclude from the EU ETS installations that have reported emissions of less than 25 000 tonnes of carbon dioxide equivalent and, where they carry out combustion activities, have a rated thermal input below 35 MW, excluding emissions from biomass. Article 27a of Directive 2003/87/EC establishes that Member States are also allowed to exclude from the EU ETS installations that have reported emissions of less than 2 500 tonnes of carbon dioxide equivalent, disregarding emissions from biomass. Several Member States have decided to exclude installations from the EU ETS for the period from 2021 to 2025 based on those provisions. Those installations should not be considered when determining the revised benchmark values.
(6) Delegated Regulation (EU) 2019/331 includes rules for determining emissions at sub-installation level to ensure the consistent treatment of emissions related to imports, exports and in-house production of measurable heat, of carbon-containing waste gases and of transferred CO
2
. For that purpose, the relevant emission factors were determined by using the heat and fuel benchmark values which in turn had been updated by applying the determined annual reduction rates. For heat imports with unknown or not clearly defined emission factors and for heat exports, a value of 53,3 t CO
2
equivalents/TJ was used. That value was obtained by applying an annual reduction rate of 1,6 % to the heat benchmark value for the 9-year period from 2007/2008 to 2016/2017. For waste gas exports, a value of 37,4 t CO
2
equivalents/TJ was subtracted from the actual emission factor of the waste gas. That value corresponds to the emission factor of natural gas (56,1 t CO
2
equivalents/TJ) multiplied by a factor of 0,667 that accounts for the difference in efficiencies between the use of the waste gas and the use of the reference fuel natural gas. For waste gas imports, a value of 48,0 t CO
2
equivalents/TJ was used. That value was obtained by applying an annual reduction rate of 1,6 % to the fuel benchmark value for the 9-year period from 2007/2008 to 2016/2017.
(7) In the case of sub-installations importing intermediate products whose production is covered by the system boundaries of the relevant product benchmark and where it was not feasible to determine the greenhouse emissions associated with the production of those intermediate products based on the submitted data, the greenhouse gas efficiencies of the concerned sub-installations should not be considered when determining the revised benchmark values. This concerns the benchmark value updates for refinery products, hot metal, sintered dolime, ammonia, hydrogen and soda ash. In the case of sub-installations exporting intermediate products, and where it was not feasible to determine the greenhouse emissions associated with the subsequent processes based on the submitted data, the greenhouse gas efficiencies of the concerned sub-installations should not be considered when determining the revised benchmark values. This concerns the benchmark value update for refinery products, and hot metal.
(8) The methodology for attributing emissions to different sub-installations that is established in Delegated Regulation (EU) No 2019/331 can lead to negative greenhouse gas efficiencies in cases in which heat produced using a fuel with a low emission factor is exported to other sub-installations or installations. In such cases, the greenhouse gas efficiency of the concerned sub-installation should be set to zero for the purpose of determining the revised benchmark values.
(9) The measures provided for in this Regulation are in accordance with the opinion of the Climate Change Committee,
HAS ADOPTED THIS REGULATION:

Article 1

The revised benchmark values listed in the Annex shall apply for the harmonised free allocation of emission allowances for the period from 2021 to 2025.

Article 2

This Regulation shall enter into force on the twentieth day following that of its publication in the
Official Journal of the European Union
.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 12 March 2021.
For the Commission
The President
Ursula VON DER LEYEN
(1)  
OJ L 275, 25.10.2003, p. 32
.
(2)  Commission Decision 2011/278/EU of 27 April 2011 determining transitional Union-wide rules for harmonised free allocation of emission allowances pursuant to Article 10a of Directive 2003/87/EC of the European Parliament and of the Council (
OJ L 130, 17.5.2011, p. 1
).
(3)  Commission Delegated Regulation (EU) 2019/331 of 19 December 2018 determining transitional Union-wide rules for harmonised free allocation of emission allowances pursuant to Article 10a of Directive 2003/87/EC of the European Parliament and of the Council (
OJ L 59, 27.2.2019, p. 8
).
(4)  Directive (EU) 2018/410 of the European Parliament and of the Council of 14 March 2018 amending Directive 2003/87/EC to enhance cost-effective emission reductions and low-carbon investments, and Decision (EU) 2015/1814 (
OJ L 76, 19.3.2018, p. 3
).

ANNEX

Benchmarks

For the purposes of this Annex, the definitions of products covered and of processes and emissions covered (system boundaries) set out in Annex I to Delegated Regulation (EU) 2019/331 shall apply.

1.   

Product benchmarks without consideration of exchangeability of fuel and electricity

Product benchmark

Average value of the 10 % most efficient installations in 2016 and 2017 (t CO2 equivalents/t)

Benchmark value (allowances/t) for 2021-2025

Coke

0,144

0,217

Sintered ore

0,163

0,157

Hot metal

1,331

1,288

Pre-bake anode

0,317

0,312

Aluminium

1,484

1,464

Grey cement clinker

0,722

0,693

White cement clinker

0,973

0,957

Lime

0,746

0,725

Dolime

0,881

0,815

Sintered dolime

1,441

1,406

Float glass

0,421

0,399

Bottles and jars of colourless glass

0,323

0,290

Bottles and jars of coloured glass

0,265

0,237

Continuous filament glass fibre products

0,290

0,309

Facing bricks

0,094

0,106

Pavers

0,140

0,146

Roof tiles

0,130

0,120

Spray-dried powder

0,050

0,058

Plaster

0,048

0,047

Dried secondary gypsum

0,008

0,013

Short fibre kraft pulp

0,000

0,091

Long fibre kraft pulp

0,001

0,046

Sulphite pulp, thermo-mechanical and mechanical pulp

0,000

0,015

Recovered paper pulp

0,000

0,030

Newsprint

0,007

0,226

Uncoated fine paper

0,011

0,242

Coated fine paper

0,043

0,242

Tissue

0,139

0,254

Testliner and fluting

0,071

0,188

Uncoated carton board

0,009

0,180

Coated carton board

0,011

0,207

Nitric acid

0,038

0,230

Adipic acid

0,32

2,12

Vinyl chloride monomer (VCM)

0,171

0,155

Phenol/acetone

0,244

0,230

S-PVC

0,073

0,066

E-PVC

0,103

0,181

Soda ash

0,789

0,753

2.   

Product benchmarks with consideration of exchangeability of fuel and electricity

Product benchmark

Average value of the 10 % most efficient installations in 2016 and 2017 (t CO2 equivalents/t)

Benchmark value (allowances/t) for 2021-2025

Refinery products

0,0255

0,0228

EAF carbon steel

0,209

0,215

EAF high alloy steel

0,266

0,268

Iron casting

0,299

0,282

Mineral wool

0,595

0,536

Plasterboard

0,119

0,110

Carbon black

1,141

1,485

Ammonia

1,604

1,570

Steam cracking

0,693

0,681

Aromatics

0,0072

0,0228

Styrene

0,419

0,401

Hydrogen

4,09

6,84

Synthesis gas (syngas)

0,009

0,187

Ethylene oxide/ethylene glycols

0,314

0,389

3.   

Heat and fuel benchmarks

Benchmark

Average value of the 10 % most efficient installations in 2016 and 2017 (t CO2 equivalents/TJ)

Benchmark value (allowances/TJ) for 2021-2025

Heat benchmark

1,6

47,3

Fuel benchmark

34,3

42,6

Markierungen
Leseansicht