21995D1230(06)
Decision No 2/95 of the Association Council, association between the European Communities and their Member States, of the one part, and the Slovak Republic, of the other part of 19 December 1995 concerning the export of certain ECSC and EC steel products from the Slovak Republic to the Communities
Official Journal L 325 , 30/12/1995 P. 0065 - 0078
DECISION No 2/95 OF THE ASSOCIATION COUNCIL,
association between the European Communities and their Member States, of the one part, and the Slovak Republic, of the other part
of 19 December 1995
concerning the export of certain ECSC and EC steel products from the Slovak Republic to the European Communities
(95/575/ECSC)
THE ASSOCIATION COUNCIL,
Whereas the Contact Group referred to in Article 10 of Protocol 2 of the Europe Agreement establishing an association between the European Communities and their Member States, of the one part, and the Slovak Republic, of the other part, which entered into force on 1 February 1995 (1), met on 21 and 22 September 1995 to discuss trends in imports of ECSC and EC products from the Slovak Republic into the Community and recognized the need to find appropriate solutions in the framework of Article 34 (2) of the Agreement in order to ensure that the attainment of the objectives of the Agreement will not be jeopardized;
Whereas, in view of the need for both parties to have rapid information on the trend of trade flows in order to increase transparency and to avoid possible diversions of trade, the Contact Group decided to refer the matter to the Association Council established under Article 104 of the Agreement;
Whereas the Parties are desirous to promote the orderly and equitable development of trade in steel between the Community and the Slovak Republic;
Whereas the Association Council, having been supplied with all relevant information, has determined that the solution acceptable to the two Parties is a double-checking system, without quantitative limits, for the import into the Community of certain steel products covered by the ECSC and EC Treaties for an initial period between 1 January and 31 December 1996,
HAS DECIDED AS FOLLOWS:
Article 1
1. For the period 1 January to 31 December 1996, imports into the Community of the products listed in Annex I originating in the Slovak Republic shall be subject to the presentation of an import document conforming to the model shown at Annex II issued by the authorities in the Community.
2. The classification of the products covered by this Decision is based on the tariff and statistical nomenclature of the Community (hereinafter called the 'combined nomenclature', or in abbreviated form 'CN'). The origin of the products covered by this Decision shall be determined in accordance with the rules in force in the Community.
3. For the period 1 January to 31 December 1996, imports into the Community of the iron and steel products listed in Annex I and which originate in the Slovak Republic shall, in addition, be subject to the issue of an export document by the competent Slovak authorities. Presentation by the importer of the original of the export document must be effected not later than 31 March of the year following that in which the goods covered by the document where shipped.
4. An export document will not be required for goods already shipped to the Community before 1 January 1996, provided that the destination of such products is not changed and that those products which may be imported only on presentation of an import document are in fact accompanied by such a document.
5. Shipment is considered to have taken place on the data of loading onto the exporting means of transport.
6. The export document shall conform to the model shown in Annex III. It shall be valid for exports throughout the customs territory of the Community.
7. The Slovak Republic shall notify the Commission of the European Communities of the names and addresses of the appropriate Slovak governmental authorities which are authorized to issue and to verify export documents together with specimens of the stamps and signatures they use. The Slovak Republic shall also notify the Commission of any change in these particulars.
8. Certain technical provisions on the implementation of the double-checking system are set out in Annex IV.
Article 2
1. The Slovak Republic undertakes to supply the Community with precise statistical information on the export documents issued by the Slovak authorities pursuant to Article 1. Such information shall be transmitted to the Community by the end of the month following the month to which the statistics relate.
2. The Community undertakes to supply the Slovak authorities with precise statistical information on import documents issued by Member States in respect of the products listed in Annex I. Such information shall be transmitted to the Slovak authorities by the end of the month following the month to which the statistics relate.
Article 3
If necessary, at the request of either of the Parties, consultations shall be held on any problems arising from the operation of this Decision. Such consultations shall be held promptly. Any consultations held under this Article shall be approached by both Parties in a spirit of cooperation and with a desire to reconcile the difference between them.
Article 4
Any notices to be given hereunder shall be given:
- in respect of the Community, to the Commission of the European Communities (DG I.D.2 and DG III.C.2),
- in respect of the Slovak Republic, to the Mission of the Slovak Republic to the European Communities; and the Ministry of Economy of the Slovak Republic.
Article 5
This Decision shall be binding on both the Community and the Slovak Republic which shall take the measures necessary to implement it.
Article 6
This Decision shall enter into force on the date of signature.
It shall apply with effect from 1 January 1996.
Done at Brussels, 19 December 1995.
For the Association Council
The President
L. ATIENZA SERNA
(1) OJ No L 359, 31. 12. 1994, p. 2.
ANNEX I
SLOVAK REPUBLIC List of products subject to double-checking (1996)
Hot-rolled coils and pickled coils
7208 10 00
7208 25 00
7208 26 00
7208 27 00
7208 36 00
7208 37 10
7208 37 90
7208 38 10
7208 38 90
7208 39 10
7208 39 90
7219 11 00
7219 12 10
7219 12 90
7219 13 10
7219 14 10
7219 14 90
7225 19 10
7225 20 20
7225 30 00
Cut lenghts
7208 40 10
7208 40 90
7208 51 10
7208 51 99
7208 52 10
7208 52 99
7208 53 10
7208 53 90
7208 54 10
7208 54 90
7208 90 10
7208 90 90
Cold-rolled sheets and coils
7209 15 00
7209 16 90
7209 17 90
7209 18 91
7209 18 99
7209 25 00
7209 26 90
7209 27 90
7209 28 90
7209 90 10
7209 90 90
Hot-rolled strip and hoop
7211 14 10
7211 14 90
7211 19 20
7211 19 90
7212 60 91
7220 11 00
7220 12 00
7220 90 31
7226 19 10
7226 20 20
7226 91 10
7226 91 90
7226 93 20
7226 94 20
7226 99 20
Cold-rolled strip and hoop
7211 23 10
7211 23 51
7211 23 99
7211 29 20
7211 90 19
7211 90 90
7226 92 90
7226 93 80
7226 94 80
7226 99 80
Hot dip galvanized sheets, coils and strip
7210 11 90
7210 41 90
7210 61 10
7212 30 90
Tinplate in coils, sheet and strip
7210 12 11
7210 70 31
7210 70 39
7212 10 99
Non oriented grain steel sheets, coils and strip for electrotechnics
7209 17 10
7209 27 10
7211 23 91
Seamless tubes
Complete CN heading 7304
ANNEX II
>REFERENCE TO A FILM>
ANNEX III
>REFERENCE TO A FILM>
ANNEX IV
SLOVAK REPUBLIC TECHNICAL ANNEX ON THE DOUBLE-CHECKING SYSTEM
1. The export documents shall measure 210 × 297 mm. The paper used shall be white writing paper, sized, not containing mechanical pulp, and weighing not less than 25 g/m2. They shall be made out in English. If they are completed by hand, entries must be in ink and in printed script. These documents may comprise additional copies duly indicated as such. If the documents have several copies only the top copy is the original. This copy shall be clearly marked as 'original' and other copies as 'copies'. Only the original shall be accepted by the competent authorities of the Community as being valid for the control of export to the Community in accordance with the provisions of the double-checking system.
2. Each document shall bear a standardized serial number, whether or not printed, by which it can be identified. This number shall be composed of the following elements:
- two letters identifying the exporting country as follows: SK,
- two letters identifying the intended Member State of customs clearance as follows:
BE = Belgium
DK = Denmark
DE = Germany
EL = Greece
ES = Spain
FR = France
IE = Ireland
IT = Italy
LU = Luxembourg
NL = Netherlands
AT = Austria
PT = Portugal
FI = Finland
SE = Sweden
GB = United Kingdom.
- a one-digit number identifying the year, corresponding to the last figure in the respective year, e. g. 6 for 1996,
- a two-digit number from 01 to 99, identifying the particular issuing office concerned in the exporting country,
- a five-digit number running consecutively from 00001 to 99999 allocated to the intended Member State of customs clearance.
3. The export documents shall be valid for four months from the date of their issue. Export documents may be renewed or prolonged.
4. Since the importer needs to present the original export document when requesting an import document, export documents should, as fas as possible, be issued in respect of individual commercial transactions, not global contracts.
5. The Slovak Republic need not show price information on the export document if there is a genuine need to protect commercial confidentiality. In such cases, box 9 of the export document should indicate the reason for not showing the price information and that it is available to the competent authorities of the Community on request.
6. Export documents may be issued after the shipment of the products to which they relate. In such cases they must bear the endorsement 'issued retrospectively'.
7. In the event of a theft, loss or destruction of an export document, the exporter may apply to the competent governmental authority which issued the document for a duplicate to be made out on the basis of the export documents in his possession. The duplicate of any such document so issued shall bear the endorsement 'duplicate'. The duplicate shall bear the date of the original export document.
8. The competent authorities of the Community shall be informed immediately of the withdrawal or modification of any export documents already issued and, where relevant, of the basis for such action.
Feedback